Schneider Electric Altivar inverter 5.5 kW 7.5 hp 380...500 V ATV312HU55N4

Schneider Electric Altivar inverter, frequency converter 5.5 kW 7.5 hp 380...500 V ATV312HU55N4

Typical delivery time:

  Economy shipping (Russian Post) Standard Shipping (EMS Express Post) Europe 14-30 days, in rare cases up to 90 days 7-20 days, in very rare cases up to 90 days United States 20-60 days, in rare cases up to 90 days 14-30 days, in rare cases up to 90 days Canada 14-30 days, in rare cases up to 90 days 7-30 days, in rare cases up to 90 days Asia, India, Africa 14-40 days, in rare cases up to 90 days 7-20 days, in very rare cases up to 90 days Australia and Oceania 14-40 days, in rare cases up to 90 days 10-25 days, in rare cases up to 90 days South and Central America 20-40 days, in rare cases up to 90 days 14-30 days, in rare cases up to 90 days Other countries 20-60 days, in rare cases up to 90 days 10-30 days, in rare cases up to 90 days
Main range of product Altivar 312 product or component type Variable speed drive product destination Asynchronous motors product specific application Simple machine assembly style With heat sink component name ATV312 motor power kW 5.5 kW motor power hp 7.5 hp [Us] rated supply voltage 380...500 V - 15...10 % supply frequency 50...60 Hz - 5...5 % network number of phases 3 phases line current 21.9 A at 380 V, Isc = 22 kA
16.5 A at 500 V EMC filter Integrated apparent power 15 kVA maximum transient current 21.5 A for 60 s power dissipation in W 232 W at nominal load speed range 1…50 asynchronous motor control profile Factory set : constant torque
Sensorless flux vector control with PWM type motor control signal electrical connection Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² AWG 14
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 16 mm² AWG 6 supply Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection communication port protocol Modbus
CANopen IP degree of protection IP20 on upper part without cover plate
IP21 on connection terminals
IP31 on upper part
IP41 on upper part option card Communication card for CANopen daisy chain
Communication card for DeviceNet
Communication card for Fipio
Communication card for Modbus TCP
Communication card for Profibus DP Complementary supply voltage limits 323…550 V prospective line Isc 22 kA continuous output current 14.3 A at 4 kHz output frequency 0…500 kHz nominal switching frequency 4 kHz switching frequency 2...16 kHz adjustable transient overtorque 170…200 % of nominal motor torque braking torque 150 % during 60 s with braking resistor
100 % with braking resistor continuously
150 % without braking resistor regulation loop Frequency PI regulator motor slip compensation Automatic whatever the load
Adjustable
Suppressable output voltage 19 V (state 0)
Positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1) discrete output number 2 discrete output type Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
Configurable relay logic: (R2A, R2B) NC - 100000 cycles minimum switching current R1-R2 10 mA at 5 V DC maximum switching current R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms discrete input number 6 discrete input type (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm acceleration and deceleration ramps Linear adjustable separately from 0.1 to 999.9 s
S, U or customized braking to standstill By DC injection protection type Input phase breaks: drive
Line supply overvoltage and undervoltage safety circuits: drive
Line supply phase loss safety function, for three phases supply: drive
Motor phase breaks: drive
Overcurrent between output phases and earth (on power up only): drive
Overheating protection: drive
Short-circuit between motor phases: drive
Thermal protection: motor insulation resistance >= 500 mOhm 500 V DC for 1 minute local signalling 1 LED (red)drive voltage:
Four 7-segment display unitsCANopen bus status: time constant 5 ms for reference change frequency resolution Analog input: 0.1...100 Hz
Display unit: 0.1 Hz connector type 1 RJ45 for Modbus/CANopen physical interface RS485 multidrop serial link transmission frame RTU transmission rate 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen
4800, 9600 or 19200 bps for Modbus number of addresses 1…127 for CANopen
1…247 for Modbus number of drive 127 for CANopen
31 for Modbus marking CE operating position Vertical +/- 10 degree outer dimension 442 x 239 x 192 mm
300 x 210 x 170 mm
232 x 180 x 170 mm
402 x 239 x 192 mm height 232 mm width 180 mm depth 172 mm net weight 6.5 kg